User manual

ADPRO FastTrace-R by Xtralis Installation and User Manual
Doc 13972_03 77
4.3.9 Monitor
A local monitor can be connected to the FastTrace-R and used to display a number of camera
views in a sequence.
Figure 75: Monitor Menu
Monitor Settings
Set the Local Monitor Connected checkbox if a sequence monitor is to be used. Click the
Configure button to setup the sequence.
Sequence List
The list defines the sequence (order) in which camera images are presented on the monitor. The
sequence list can show up to 20 cameras and the checkbox next to the camera number will
select that camera for inclusion.
Dwell Time
Options: Range 1 to 99
Factory Default: 2 seconds
Dwell Time is used to control the duration (in seconds) that a camera in the Sequence List is
displayed on the monitor. The Sequence Time is common to all active channels and is defined as
the duration a channel (camera) is displayed before switching to the next active channel. It can
be set from 1 to 99 seconds.
4.3.10 Transaction Devices
The Transaction Interfacing option provides a mechanism to associate video data with EPOS/
ATM transactions. This enables users to historically review data synchronised to video, with the
ability to search the data based on keywords and to display corresponding video.