User manual

Installation and User Manual ADPRO FastTrace-R by Xtralis
52 Doc 13972_03
4.3 Entering the FastTrace-R Setup Screen
Note: Always use extreme caution when remotely programming FastTrace-R units.
Changing connection parameters or passwords may result in the VideoCentral
system not being able to regain access, resulting in the need for engineering
attendance at the site to reprogram the system.
Remote programming of FastTrace-R systems is carried out via a screen as shown below. To
start the programming operation, click on the Installer Menu button behind the Site Actions
button in the main VideoCentral User Interface GUI:
Figure 55: Installer Menu Icon
Note: Only operators logged on to the system either as Administrators or Installers have
access to this icon. Users defined as Operators do not have access to this function.
If this icon does not appear or appears greyed out, log out the current operator and
log-on a new operator with the correct access rights.
The current settings within the FastTrace-R will be downloaded to the VideoCentral system and
the following screen will appear: