User manual

Installation and User Manual ADPRO FastTrace-R by Xtralis
26 Doc 13972_03
9. Save all changes when exiting the User Settings menu.
10. Reset Switch 7 to the OFF position and power cycle the unit.
The FastTrace-R will now operate with the new Site ID, Password and Network Address.
2.14 Firewall Configuration
If the FastTrace-R unit is connected via a firewall, the following table describes the destination
port allocation for the VideoCentral PC and FastTrace-R unit. Source ports are randomly chosen.
The control of connections should be done using IP addresses and destination ports.
Table 1: Firewall Ports
Destination Ports on VideoCentral Destination Ports on FastTrace-R
UDP 15000-15200 UDP 15000-15005
TCP 15001-15007 TCP Any port