User manual

Installation and User Manual ADPRO FastTrace-R by Xtralis
24 Doc 13972_03
Figure 29: Configure a New Site
2. Enter the following details for the FastTrace-R unit:
- Site Id: 9 characters (max) - this is the name of the FastTrace-R unit
- CMS Password: 8 characters (max)
- Communications: Network
3. For the Network selection, enter a valid IP address for the FastTrace-R
4. Click OK. The configure Site dialog box is shown again. Click Close. The System
Administration options are then shown. Click Exit.
For a network connection, the PC must now have its IP Address changed to be on the same
subnet mask as the modified IP Address of the FastTrace-R (but with a different IP address).
Refer to Section 2 - Configuring the PC for Ethernet Connection for details of how to perform this.
2.11 Testing the FastTrace-R Installation
1. Reconnect to the FastTrace-R by selecting the Connect to site button, highlighting the new
site (unit name) and press OK.
2. Test the operation of all connected cameras by selecting each camera in turn from the drop
down list on the user interface.
Figure 30: Camera List