User manual

ADPRO FastTrace-R by Xtralis Installation and User Manual
Doc 13972_03 9
2.7.3 Configuring the PC for Ethernet Connection
A crossover Category 5 Ethernet cable is supplied for connection between the PC’s network port
and the FastTrace-R Ethernet (Network) port. This cable must be connected between the PC
and FastTrace-R prior to powering on the FastTrace-R.
The (factory) TCP/IP network address for the FastTrace-R is: 192.168.1.1
The (factory) subnet mask address is 255.255.255.0
For the PC to be able to successfully connect to the FastTrace-R, the PC IP settings must be
modified to a class C address.
1. Click the Windows Start button.
2. Select Control Panel / Network Connections, right click on Local Area Connection and
select Properties.
3. Select Internet Protocol (TCP/IP) and click Properties.
Figure 5: Internet Protocol
4. Change the PC IP settings to the following: 192.168.1.2
5. Set the subnet mask address to: 255.255.255.0
6. Click OK, and the Local Area Connection Properties box is displayed again. Click OK and
close the Network and Dial up Connections panel.