User manual

Installation and User Manual ADPRO FastTrace-R by Xtralis
6 Doc 13972_03
This permanent earth connection point is an M4 tapped insert on the metalwork and is supplied
with a screw and washer as shown below.
Figure 2: FastTrace-R Grounding Requirements
Connect this earth point to a protective earth point in the system installation using 2.5 mm 2 wire
(minimum) and suitable ring terminals.
The installation protective earth point must be installed in accordance with local electrical
installation codes and requirements.
2.4 Unpacking the FastTrace-R
When you first receive the FastTrace-R it is important to check that:
• You have received the equipment that you ordered.
• The box contains all the necessary components.
After unpacking the FastTrace-R, carefully check for any sign of damage. Any damage should be
reported before installation to your supplier or to Xtralis directly. Check that the FastTrace-R
packing carton contains the following items:
1 FastTrace-R chassis
1 DVD containing VideoCentral software
1 Installation and User Manual
1 Crossover Ethernet cable
1 9-way screw terminal plug
4 or 6 15-way screw terminal plug (Model 5010=4, Model 5020=6)
1 IEC power cord
The DVD contains software that must be loaded onto a PC or laptop in order to program the
system.
Note: The FastTrace-R Installation and User Manual is also available in PDF format on
the DVD.