User manual

ADPRO FastTrace-R by Xtralis Installation and User Manual
Doc 13972_03 119
8 Upgrading the FastTrace-R Software
The FastTrace-R software can be upgraded via VideoCentral or FT-R Viewer software running
on a PC or laptop. The software can be upgraded over any communications network, as long as
a connection can be established between the FastTrace-R and PC. The time for the upgrade to
occur will vary depending on the communication speed of the link.
8.1 Software Upgrade Process
The process to upgrade the FT-R software is as follows:
1. From VideoCentral or the FT-R Viewer, connect to the FastTrace-R to be upgraded. The
CMS password must be used to gain access to the upgrade capability, so ensure that in the
Site List the CMS password is entered. Also ensure that no alarms are pending.
2. Select the Remote Upgrade icon as shown below from the Site Actions flyout:
Figure 114: Upgrade Icon
3. The upgrade file selection dialog will appear. Select the file via the Browse function and
click OK.
Figure 115: Upgrade Dialog
4. Select Yes from the confirmation dialog. The 'flying papers' popup will now appear.