User manual

Installation and User Manual ADPRO FastTrace-R by Xtralis
100 Doc 13972_03
Guard Tour Settings
Guard Tour operation provides a sequence through cameras programmed on the FastTrace-R
unit. Depending on the display configuration (single screen or 4, 7, 9, 10, 13, 16 or 20 way split)
the system will display all cameras and sequence through on the screen, or sets of cameras will
be displayed. For instance if 16 cameras are configured for Guard Tour operation and a 4 way
split is chosen, then the display will sequence through the first four cameras, then swap to the
next four cameras.
To select which cameras are included in the Guard Tour click on the Configure button.
Figure 100: Guard Tour Camera List
Check the cameras needed in the Guard Tour and also enter a Dwell Time.
Selectable Multi-Screen Settings
Figure 101: Selectable Multi-Screen Settings