User manual

ADPRO FastTrace-R by Xtralis Installation and User Manual
Doc 13972_03 99
4.3.21 Multi-Screen Live Behaviour
Figure 99: Multi-Screen Live Behaviour Menu
This feature allows the user to view multiple channels in Live Mode simultaneously, in preset
configurations.
VideoCentral V8.04 or higher and FastTrace-R system software version 1.00 or higher must be
installed on the transmitter for Multi-Screen to be available. The system will not allow any user to
access the Multi-Screen functionality if the FastTrace-R transmitter does not support it (due to its
hardware or software configuration).
The performance of the Multi-Screen Live feature is dependant on the number of compression
cards installed in the FastTrace-R unit. A minimum of two compression cards are required for the
Multi-Screen Live feature to operate effectively. For maximum performance, one extra
compression card should be fitted over and above the number required to meet the required
recording rates.
The FastTrace-R will only allow one connected user to use Multi-Screen functionality at any one
time.
All other users (connected currently or in the future) will not be able to access Multi-Screen as
long as the functionality is reserved by another user, unless their privilege level is higher than
that of the connected user.
For a connected user to release the Multi-Screen functionality, the user has to:
• select any video mode other than Multi-Screen (this includes Pause),
• disconnect, or
• lose it to a more privileged user.
The highest privilege level is CMS Operator. All connected users will receive a notification when
the Multi-Screen Status changes.