User manual

ADPRO FastTrace-R by Xtralis Installation and User Manual
Doc 13972_03 95
Figure 93: Event Trigger Settings
Alarm Logic
The Alarm Logic option is used to set up the logical order in which Alarm Inputs are treated
before a recording event is declared to be ‘valid’.
Up to ten detectors can be associated with any one camera.
Options: When ANY input occurs, Only when ALL inputs occur
Default: When ANY input occurs
From the drop-down list, select whether this camera will be triggered when ANY of the inputs are
triggered (i.e. any one of the events defined in the list below will cause an Event reaction within
FastTrace-R) or when ALL inputs are triggered (i.e. when all inputs are triggered simultaneously).
When the ALL option is selected, the Hold Time for the various inputs as previously defined (in
Connected Equipment / Alarm Inputs) will also be used.
Event Inputs
For the Alarm Logic to operate, one or more Event Inputs must be assigned. Use the Add to
list button to display the Event Input Settings dialog.
Figure 94: Event Input Settings
Up to 10 different Event Inputs and associated presets can be configured for each camera in the
currently selected Mode.