Manualshelf

User manual

ManualsBrandsAVE ManualsNetwork CardVideo Serial Synchronous ATM Interface VSSI-PRO
101102103104105106107108109110
ADPRO FastTrace-R by Xtralis Installation and User Manual
Doc 13972_03 93
Video Capture (tab)
The Video Capture settings define the conditions that need to be met for video to be recorded.
This includes the type of recording, the video quality, recording rate and duration of recording.
Figure 91: Video Capture Settings
Define the Recording Type to be used on this camera during the currently selected Mode. The
options are:
Do Not Record: This camera will not be recorded at all during this mode of operation.
Continuous: The camera will be constantly recorded at the same rate and quality as defined in
the Capture Settings whilst this Mode is active. No Events (Alarm Inputs or Activity Detection
operations) can be applied to the camera.
Event: Images will not be routinely recorded to the hard disk under normal operations. Images
will only be recorded when an Event is activated as defined under the Event Triggers tab for this
particular mode. Within the Capture Settings it is possible to define the rate, quality and amount
(time) of recording both prior to and after the Event Trigger. The system will also react to an event
as defined under the Event Response tab.
Continuous and Event: Images will be recorded at all times. When an Event is activated (as
defined under the Event Triggers tab for this particular mode) the recording rate and quality will
be changed as defined in the Capture Settings in respect to quality, rate of images and for how
long after the event is triggered. The system will also react to an event as defined under the
Event Response tab.
In the Capture Settings box, the quality and amount of images per second can be set. Where
Events are being used it is also possible to define for how long before (Pre-Event) and after the
event trigger (Event) the system will continue to record in the defined rate and quality.
To define the Capture Settings, highlight the required recording operation (for example Event)
and press the Configure… button. The following screen is displayed:
Figure 92: Video Capture Settings