User manual

ADPRO FastTrace-R by Xtralis Installation and User Manual
Doc 13972_03 89
4.3.18 Operational Modes
Figure 86: Operational Modes Menu
Up to four different modes can be programmed into the system. Numerous different operational
characteristics can be changed within the different modes such as:
• Rate and Quality of images being recorded for individual cameras.
• Event triggers associated with cameras.
• How audio is recorded.
Examples of how operational modes can be used:
Day Mode: Recording is focused primarily on the internal cameras within a building, whilst
external cameras have lower recording rates and qualities.
Night Mode: Recording is focused on the external cameras around the site, internal cameras are
not recorded until the external system is triggered.
Note: The modes are defined in the following sections (i.e. Audio Behaviour, Camera
Behaviour etc).
Any previously entered mode names will appear next to an assigned number. To name a new
mode or change the name of a mode, highlight the Number and use the Configure button to
open the Mode Properties dialog box.
Recording Mode Name
Options: <name> Maximum 16 characters
Enter a descriptive name for this recording mode.
Mode Selection
Options: Use External Input, Use Calendar
Default: Use External Input
Note: The choice of a Mode Selection Method will apply to ALL modes.