User manual

ADPRO FastTx by Xtralis Installation and User Manual
Doc 11949_06 47
3.11 Data Connection
A single 9 way D connector is provided on the unit for data connection, such as Transparent
RS232. The transparent data capability provides the ability for the system to transfer data from a
device connected to a serial port on the ADPRO VideoCentral PC to the data port on the ADPRO
FastTx and vice versa. The data connection supports baud rates of 1200, 2400, 4800, 9600,
19200, 38400 and 57600.
Figure 53: Pin Numbering of the Data Port
Table 10: Data Port Connections
3.12 Connecting to the General I/O
General Inputs/Outputs are available via screw connection strips on the rear panel.
Figure 54: Pinouts for General I/O Connector
PIN Signal Description
1 DCD Carrier Detect
2 RXD Receive Data
3TXDTransmit Data
4 DTR Data Terminal Ready
5 GND Signal Ground
6 DSR Data Set Ready
7 RTS Request to send
8 CTS Clear to send
9 +V Signal High
EE
A/S
CLK
PTT
MOD SEL
FLT COM
FLT NO
FLT NC
P73 generaliopinouts.cdr
1 2 3 45678 9101112 13 14 15
GND GND GND GND
Pins 1-15
15-pin Screw Terminal Connector
ALM COM
ALM NO
ALM NC