User manual

Installation and User Manual ADPRO FastTx by Xtralis
6 Doc 11949_06
Figure 2: ADPRO FastTx Grounding Requirements
Connect this earth point to a protective earth point in the system installation using 2.5 mm 2 wire
(minimum) and suitable ring terminals.
The installation protective earth point must be installed in accordance with local electrical
installation codes and requirements.
2.4 Unpacking the ADPRO FastTx
When you first receive the ADPRO FastTx it is important to check that:
• You have received the equipment that you ordered.
• The box contains all the necessary components.
After unpacking the ADPRO FastTx, carefully check for any sign of damage. Any damage should
be reported before installation to your supplier or to Xtralis directly. Check that the ADPRO
FastTx
packing carton contains the following items:
1 ADPRO FastTx chassis
1 DVD containing ADPRO VideoCentral software
1 Installation and User Manual
1 Crossover Ethernet cable
1 9-way screw terminal plug
4 or 6 15-way screw terminal plug (Model 5010=4, Model 5020=6)
1 IEC power cord
The DVD contains software that must be loaded onto a PC or laptop in order to program the
system.
Note: The ADPRO FastTx Installation and User Manual is also available in PDF format
on the DVD.