User manual

ADPRO FastTx by Xtralis Installation and User Manual
Doc 11949_06 119
7 Upgrading the ADPRO FastTx Software
The ADPRO FastTx software can be upgraded via ADPRO VideoCentral or ADPRO FastTx
Viewer software running on a PC or laptop. The software can be upgraded over any
communications network, as long as a connection can be established between the ADPRO
FastTx and PC. The time for the upgrade to occur will vary depending on the communication
speed of the link.
7.1 Software Upgrade Process
The process to upgrade the ADPRO FastTx software is as follows:
1. From ADPRO VideoCentral or the ADPRO FastTx Viewer, connect to the ADPRO FastTx to
be upgraded. The CMS password must be used to gain access to the upgrade capability, so
ensure that in the Site List the CMS password is entered. Also ensure that no alarms are
pending.
2. Select the Remote Upgrade icon as shown below from the Site Actions flyout:
Figure 113: Upgrade Icon
3. The upgrade file selection dialog will appear. Select the file via the Browse function and
click OK.
Figure 114: Upgrade Dialog
4. Select Yes from the confirmation dialog. The 'flying papers' popup will now appear.
Figure 115: 'Flying Papers' Pop-up