User manual

Installation and User Manual ADPRO FastTx by Xtralis
118 Doc 11949_06
• If you are getting bad quality audio from the site to the control room:
- Check that the audio cable is not running in the same cable as the power for the
speakers and microphones.
- Make sure that the central station is also capable of connecting into your site, as just
because you can dial out does not mean they can dial in.
• If the Access/Secure or Mode Select Input is being used, ensure that it is wired correctly
and that the ADPRO FastTx changes state as expected.
• If backup communications are used, ensure that if the primary communications channel is
not available, that the backup channel works as expected.