User manual

ADPRO FastTx by Xtralis Installation and User Manual
Doc 11949_06 97
Dial Out on Event
When checked, an Event on this camera channel will cause the ADPRO FastTx system to send
an alert with details of the event to the CMS, following the rules previously defined in
Communications / Call List.
Dial Out Only When Armed (Secure): Unchecking this setting can be used to override the
Armed / Disarmed status of the system for this particular camera in this particular mode,
effectively creating a 24-hour zone (i.e. can be used for Panic Buttons etc).
Important: Use extreme caution when using this setting in conjunction with
Activity Detection triggered events, as this can cause many false /
nuisance alarms and block access to programming.
Dial Out on Video Loss
Options: Yes, No
Factory Default: Yes
When checked, ADPRO FastTx will dial-out, sending an alert to the CMS, in the event of lost
video on this camera channel due to camera disconnection or output failure. Note that this
operation is looking for presence of video by the Sync Pulse - this is not a Contrast (or 'Black-
bag') alarm.
Dial Out on Invalid Contrast
Options: Yes, No
Factory Default: No
Select the Dial out on invalid contrast checkbox if operators are to be notified if a Contrast
Alarm condition occurs on this camera. A contrast alarm will occur if the camera contrast level
changes to a level that lies outside of a user definable range.