User guide

9
9. Zoom IN & Zoom OUT
Press and hold the switch to zoom in and zoom out the
image infront of the camera.
10. Focus OUT
Press Focus OUT to focus the object.
11. Power Switch
Turn this switch to Manul position to power the system
manually. Switch to AUTO to power up the system auto-
matically. Switch it to OFF to power off the system.
12. Stop
Press the Stop button to STOP the running tape.
13. Rew
Press the REW button to rewind the tape in the stop mode
or press for reverse picture search in the playback mode.
14. Play
Press this button to start the playback mode.
15. FFW
Press FFW button to fast forward the tape while VCR is
instop modeor press in play mode to forward picture
search.
16. REC
Press REC button to start recording, Light on the
17-20 SET, UP, DOWN, & RESET
These are the programming buttons for the VCR. See the
programing section for operation of those buttons.
21. MIC ACT
MIC ACT switch is use to turn microphone activation ON
or OFF. Please see the Power up section of the BASIC
PROGRAMMING for more operation details.
22. Camera
You can select the front or rear camera/ microphone by
switching this switch to FRONT or REAR respectively.
23. Speaker
Play the live sound from the microphone or from the VCR.
24. Display Switch
Use this switch to turn ON or OFF the LCD of control head.
25. Bright
Move this switch to clockwise or counter clock wise to
adjust the LCD brightness.
26. Volume
Turn this switch to clockwise or counterclockwise to ad-
just the volume of the control head.
27. Interface
Interface connector for interfacing with siren and over-
head light.
28. Control
DB-25 connector for control head that interface with vault.
29. Camera
Connect the front camera with this input.
Vault
1. Programming Lock/ Unlock Key
Programming cannot be done without unlocking this key.
See programming section for more details.
2. Antenna Connector
3. Power Connector
4. Rear Camera & microphone connector
5. DB-9 Connector for Radar Gun
6. Vault Control Connector
7. 3 Amp Circuit Breaker
1
234
5
6
7