PROSECUTOR I (2.
Please read CAUTION! RISK OF ELECTRICAL SHOCK! DO NOT OPEN! CAUTION! TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGE ARE PRESENTS INSIDE THE ENCLOSURE. DO NOT OPEN THECABINET. REFERSERVICINGTOQUALIFIEDPERSONALONLY. CAUTIONS: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDESLOT,FULLYINSERT.
Table of Contents FOREWORD.........................................................................3 ACCESSORIES....................................................................4 FEATURE & SPECIFICATION.............................................4 INSTRUCTION IN BRIEF.....................................................7 INSTALLATION...................................................................10 CONNECTIONS..................................................................11 BASIC OPERATIONS.......
Foreword We thank you for your purchase of the PROSECUTOR I SYSTEM (Trunk Mounted Unit). You have purchased a high quality system that will provide you with many years of trouble free service. Should you have any question about the system, or any problems, please call (800)- 4829211 or fax (281)-443-9079.
Accessories • • • • • • • • • • • Control Head Front Camera Wireless microphone (Transmitter and Reciver) Video Cassette Recorder Antenna Rear Camera with Microphone (optional) Control cable Interface cable power cable 2 AA batteries User Guide Features & Specifications Special Feature • • • • • • Smallest Trunk VAULTAvailable 16 X optical Zoom Low Light Auto Focus Camera, 1.
Control Head • • • • • • • • • • 2.9 inch Color LCD monitor ( enclosed inside the control head) Pedestaloverheadmounted Color coded control button (LED Warnings: Record (green); Low Tape (orange); Audio On (green); Low Voltage(red); MicActivated (green) Remote Activation switch Rear Seat Camera / Audio Switch Rugged Switch Control Audio volume control and LCD brightness control Led output indicating both audio and recording are functional (optional) Construct with 14 gauge steel. Dimension11”x6.
• • • out and programming menu when selected. RS-232 interface to most Radar and Laser speed measuring devices Automatic search for the last recorded portion of tape before recording Recording can be started withAudio transmitter, Siren signal, or Light signal Audio Transmitter and Receiver • • • • • • • • • Transmitter dimension 3.5” X 2.
Instructions in Brief Control Head 8 9 10 1 11 2 12 17 3 13 4 18 14 5 19 15 6 20 16 7 21 22 23 24 24 25 26 27 28 29 1.Liquid Crystal Display (LCD) It Display the live images of the camera or record images of the VCR. 5. End Tape LED 2. Recording LED 6. MIC ACT LED End of Tape light indicates that this is the END of the tape. The Record light indicate that VCR is in Recording mode. Microphone Active LED indicate that Microphone activation switch ( # 22) is ON. 3.
. Zoom IN & Zoom OUT Press and hold the switch to zoom in and zoom out the image infront of the camera. 10. Focus OUT Press Focus OUT to focus the object. 11. Power Switch 25. Bright Move this switch to clockwise or counter clock wise to adjust the LCD brightness. 26. Volume Turn this switch to clockwise or counterclockwise to adjust the volume of the control head. Turn this switch to Manul position to power the system manually. Switch to AUTO to power up the system automatically.
Installation To install the Trunk Unit System follow the following steps in order. Preparation Remove the rear seat lower half. Remove kick panel and trim strips on front and rear passenger side car. Remove or loosen lower half of trim on the door post between front and rear door enough to get the control cable under. If windshield mounted camera mount the foot to the window by following direction on the included adhesive package. FOLLOW THE INSTRUCTIONS EXACTLY.
Connections BLUE SIREN (+) BLACK SIREN (-) WHITE LIGHTBAR +12 V ORANGE SWITCHED +12 V CONTROL HEAD INTERFACE CABLE FRONT CAMERA CONTROL CABLE RADAR GUN CABLE REAR CAMERA & MIC RADAR GUN IN TRUNK UNIT RED BLACK (TO ANTENNA) 12
Basic Operations POWER UP THE SYSTEM After completing the installation of In trunk System you can power up the system as describe below: Power Up the System Manually: To turn the system on manually turn the power switch to the “Manul” position. Power up the system by the over Head Light: If the power switch is on the “AUTO” position then turning on the over head light will turn on the system.
Programming TIME & DATE SETUP In this section we discuss some of the powerful programming features of in trunk system. To access the programming mode first turn the programming key of the vault to “ON” position. You can do simple programing just by pressing the combination of “SET”, “UP”, “DOWN”, and “RESET” button. An Internal clock generates time and date that is super imposed on the LCD display. After the clock is set, the date and time modes are displayed on the monitor screen (live picture).
Selecting Date Format 1 2 3 4 TITLER Under the “Time & Date” menu place the cursor in front of “Date Format” and press “SET” button. Cursor will start blinking. Chose the format from the selection yy/mm/dd or mm/dd/yy or dd/mm/yy by pressing either “UP” or “DOWN” button. Exit out from all the menus to activate your selection. You can program up to 20 character of title on the screen. Title is places in the video horizontal line. Follow the following steps to program the title on the screen.
3 4 5 6 7 8 9 10 11 12 13 14 To make this selection press the “SET” button, above menu will pop up on the screen. Place the cursor in front of message # that you want to change and press “SET” button. Blinking cursor will appear on the screen. Enter a character using “UP” or “DOWN” button. After entering the first latter press “SET” button to move the cursor in the next place. Again use “UP” or “DOWN” button to enter next latter. Repeat steps 6 to 8 until you enter the complete the message title.
4 Under the Display setting menu place cursor in front of “display Format” using “UP” or “DOWN” button. To select display format press “SET” button. Now choose either top or bottom positions by using “UP” or “DOWN” button. Press “SET” button to chose your selection. Exit out from all the menus to activate your selection.
6 Exit out from all the menus to activate your selection. Gray Scale / Background Gray Scale/ Background color sets the gray scale and background color of the alphanumeric text on the display. Follow the procedure to set the gray scale or background color. VCR Status VCR Status if on displays all the VCR operating modes on the screen(e.g FF, REW, PLAY, REC etc). Follow the procedure to turn the VCR Status On/Off.
S e le c t R a d e r G un 1 2 3 4 Under the main menu place the cursor in front of Display settings and press “SET” button. Place the cursor in front of Temperature and press the “SET” button. Press the “UP” or “DOWN” button to select “ON” or “OFF” button. Exit from the programming mode to activate the selection. N o ne D e c a tur G e ne sys D e c a tur H unte r G o ld e n E a gle LT I 2 0 .
ACMSTALKER Decatur HUNTER, GENESYS 1 & II KUSTOMKR-10SP,TROOPER MPH K-55 TARGETRONRAPIDFIREPLUS BAUD RATE Here you select the correct Baud Rate for your Radar gun. The choices available are: 1200, 2400, 4800, & 9600. MASTER RESET Master Reset, resets all the programming to factory default. Follow the steps to do a Master Reset on . 1 2 3 4 5 6 Under the main menu place the cursor in front of “ Master Reset”. Press “SET” button to accept that selection. Master reset menu will pop up on the screen.
Warranty Information The PROSECUTOR I system is covered by ONE YEAR parts and labour warranty. To obtain service, order, parts, or accessories simply call Prosecutor of Texas between 8am-5pm Central Standard Time at (800)-482-9211. You will be given an RMA # and the shipping instructions. You MUST have an RMA # on your package before we can accept it. We do repair work on an individual basis, with each repair quoted prior to work performed if the repair is estimated to exceed $100.
Protex, Inc. 1617 E. Richey Road. Houston, Texas.
