Specifications

17
Selecting Date Format
1 Under the “Time & Date” menu place the cursor
in front of “Date Format” and press the “ F.F”
button.
2 The cursor will start blinking.
3 Chose the format from the selection yy/mm/dd
or mm/dd/yy or dd/mm/yy by pressing either
the “+” or “-” button.
4 Exit of all the menus to activate your
selection.
Set Time & Date
1 Under the “Time & Date” menu, place the cur-
sor in front of the “Set Time/Date” and press
the “F.F.” button.
2 The “Time and Date” window will pop up on the
screen as shown in the figure below.
1:11:37P 1/01/98TH
3 By pressing the “+” or “-” button you can change
the Time or Date.
4 Press the “REW” and “F.F.” button to move the
cursor either left or right side.
5 After setting the Time and/or Date press the
“STOP” button.
6 Exit all of the menus to activate your selection.
Reset Time & Date
1 Under the Time & Date menu select “Reset
Time/Date”.
3 Press and release the “F.F.” button.
4 It will reset the time and date to the factory
default settings.
5 Exit all of the menus to activate your selec-
tion.
TITLER
You can program up to a 20 character title on the screen.
Follow the following steps to program the title on the
screen. The default title is ”PROSECUTOR 2000”.
1 Press the “STOP” button of the remote control
to access the main menu.
2 Place the cursor in front of the title using the
“+” or “-” button then press and release “F.F.”
button to accept the selection.
3 Use the “+” or “-” button to select an alphanu-
meric character.
4 Use the “F.F.” button to enter next character or
use “REW” button to edit a previously entered
character.
5 You can enter up to 20 characters in a title.
6 After entering the title press and release the
“STOP” button to exit out of the title editing
mode.
7 Exit all of the menus to activate your selection.
THINGS TO KNOW
"-" button moves the alphabet in ascending order and
numerics in descending orider.
"+" button moves the alphabet in descending order and
numerics in ascending order.
"F.F." button moves the cursor toward the right position.
":REW " back space.
"S T O P " E xits o u t o f the e d iting m o d e