Specifications
7.7 Power Save
If the VCR is idle for more than 5 minutes and power Save option is ON then VCR is auto-
matically shut down. Follow the instructions to activate that option.
1 Press and hold the remote control STOP button for 5 seconds, main menu will pop
on the screen.
2 Place the cursor in front of Power Saver and press the F.F button.
3 Now use +or - button to select either ON or OFF.
4 After making your selection press the F.F button.
5 Exit out from the menu to activate your selection.
6 Place cursor in front of indicator you want to name. (e.g. if you connect to indicator 3 to breaks
and want to name is as BRK)
7 Press the F.F button to accept the selection.
8 Enter the name you want to enter by using + , -, REW or F.F buttons.
9 After entering title press the Stop button to exit out to Indicator text menu.
10 Now select other indicator to name another input indicator or select Exit to exit out of
indicator text menu.
1 1 Under the Indicator place the cursor in front of Effective Level.
12 Press F.F button to accept the above selection.
13 Under Effective level chose either active high or active lowdepending upon the
input signal.
14 Exit out from all the menu to activate the above changes