Specifications

7.5 Display Settings
RT-195 SW adds the alphanumeric information to the video signal from the camera and sends it
for recording or to the monitor. Display setting let you select the position, gray scale and format of
the text It also let you to select that if you want to display the temprature or the voltage on screen.
Following are the options in the display settings.
Display Format
Display format display alphanumeric information either on top or bottom of the screen. To set
the display follow the following instruction.
1 From remote control press the STOP button for 5 seconds, main menu will pop up
on the screen.
2 Under the main menu move cursor in front of Display Setting and press F.F but-
ton.
3 Display Setting menu will pop up on the screen as shown in figure below.
gnitteSyalpsiD
mottoBtamroFyalpsiD
noitisoPlatnoziroH
noitisoPelcitreV
dnuorgkcaB/elacSyarG
sutatSRCV
tloVtupnI
erutarpmeT
tixE
4 Under the Display setting menu place cursor in front of display Format using + or - button.
5 To select display format press F.F button.
6 Now choose either Top or Bottom using + or - button.
7 Press F.F button to chose your selection.
8 Exit out from all the menus to activate your selection.