Specifications

7.4 Record Setting
Before performing the play back/recording, it is necessary to set the desired tape speed. You
can set the tape speed, repeat record, daiiy timer, delay-off from the record setting menu.
Record Speed Selection
Consult the following table to select a correct speed for your purpose
EPAT
EPYT
PS PE
061-TSRH3SRH9
021-TSRH2SRH6
09-TNIM03RH1NIM03SRH4
06-TRH1SRH3
03-TNIM03NIM09
Follow the steps to set the speed in the VCR.
1 Press remote controls STOP button for 5 seconds to access the main menu.
2 Place the cursor in front of Recording Setting by using + or - buttons.
3 Press F.F button to accept selection, Recording setting will pop up as shown in the
figure below.
4 Now place the cursor in front of Tape/Speed and press F.F button.
5 Select EP or SP by pressing the + or - button.
6 Press the F.F button after selecting the recording speed.
7 Exit from all the menus to activate your selection.
gnitteSgnidroceR
NOtpeRdroceR
nim1ffo-yaleDteS
NOffo-yaleD
sremiTyliaD
PSdeepSepaT
tixE