Specifications

button.
2 Cursor will start blinking.
3 Chose the format from the selection yy/mm/dd or mm/dd/yy or dd/mm/yy by pressing either
+ or - button.
4 Exit out from all the menus to activate your selection.
Set Time & Date
1 Under the Time & Date menu, place the cursor in front of Set Time/Date and press
F.F button.
2 Time and Date window pop on the screen as shown in the figure below.
HT89/10/1P73:11:1
3 By pressing + or - button you can change the blinking digit of Time or Date.
4 Press REW and F.F button to move blinking digit either left or right side.
5 After setting the Time and/or Date press STOP button.
6 Exit out all the menus to activate the time that had
been enter.
Reset Time & Date
1 Under the Time & Date menu select Reset Time/Date.
3 Press and release F.F button.
4 It will reset the time and date to factory default.
5 Exit out from all the menus to activate the above selection.