Specifications

7.2 Time & Date Setup
An Internal clock generates time and date that super impose on the monitor screen. After the
clock is set, the date and time modes are displayed on the monitor screen (live picture).
Display Time & Date on Screen
1 Under Display Time & Date menu place the cursor in front of T/D display and press 
F.F button of the remote control.
2 Press + or - button to select ON or OFF.
3 Press the F.F button again to select your selection.
4 To exit out of Display Time & Date, place cursor in front of Exit and press F.F button.
5 Exit out of all the menus to activates above selection.
Note: Selecting OFF will turn off Time & Date display.
etaD/emiT
NOyalpsiDD/T
ruoH21tamroFemiT
YY/DD/MMtamroFetaD
etaD/emiTteS
etaD/emiTteseR
tixE
Selecting Time Format
1 Place the cursor in front of Time Format and press and release the F.F button.
2 Cursor will start blinking.
3 Now push + or - button to select 12 or 24 time display mode.
4 After selecting the desired selection press and release the F.F button.
5 Exit out from all menus to activate your selection.
Selecting Date Format
1 Under the Time & Date menu place the cursor in front of Date Format and press remote
controls  F.F