Instruction manual

9
3.6 Reset Time & Date
Time and date can be set to the factory default by selecting the “Reset Time
and Date” from the main menu.
TDCT-Pro Time-Date-Character-Title
3.5 Set Time & Date
Time and Date can manually set by selecting set time and date from the pro-
gramming menu.
To set the Time and Date manually. Press the “Up” or “Down” button to move
the arrow to “Set Time & Date” and press “Set”. The time/date will appear and
the cursor will start flashing. Press the “Up” or “Down” button to change the
value and press “Set” when the desired value is displayed. The value is selected
and the cursor will advance to the next position. When the desired time/date is
displayed, press the “Up” and “Down” buttons simultaneously to enter the time/
date into memory and return to the previous menu.
3. PROGRAMMING
If Daylight savings selected then the time is automatically advanced one hour in
the Spring and automatically reversed in the Fall at the appropriate time for the
selected country.
Display FMT can be programmed bottom or top by selecting BOTTOM or TOP,
If “TOP” is selected which is the default, the “TIME” and/or “COUNTER” and/or
“DATE” and/or “CNT7 COUNTER” and/or “TITLE” is respectively displayed at
the top of the screen. If “BOTTOM” is selected then the “TIME” and/or “COUNTER
”and/or “DATE” and/or “CNT7 COUNTER” and/or “TITLE” is respectively displayed
at the bottom of the screen.