Instruction manual

Note: If a sub menu has an "EXIT" selection, always go there and press "SET".

Pressing "RESET" at the main menu exits you from the program

3.3 Set Master / Slave

This programming feature can be used to select the TDCT-Pro as a master or

slave or a stand-alone unit. The Following menu appears when you select the

Set Master Slave from the main menu.

Figure 2: TDCT-Pro main menu

TDCT-Pro Time-Date-Character-Title

Figure 3: SET MASTER/SLAVE menu

3. PROGRAMMING

SET ADDRESS MSTR/ANY/1..254

EXIT

SET MASTER/SLAVE

TIME & DATE

SET TIME & DATE

RESET TIME & DATE

TITLER

SCREEN SETUP

COMMUNICATION

HELP

3.2 Main Programming Menu

TDCT-Pro has an easy On-Screen programming option that can be accessed

by pressing and holding the “UP” & “DOWN” buttons and then pressing and

releasing the “RESET” button. Then release the “Up” and “Down” buttons when

the On-Screen Menu is displayed.

Following is a detailed description of the Menu selections and the programming

capabilities of the TDCT-Pro.