Instruction manual

TDCT-Pro Time-Date-Character-Title

RS-232 COMMAND SET APPENDIX C

6. Update Date

Command /Dxx

Description

D(1 byte) Date

xx(2 bytes) 01-31

Example Update Date = 5

/D05

/ 0x2F

D 0x44

0 0x30

5 0x35

Master Reset

If you wish to set the unit back to the original factory defaults you can do this by

a Master Reset.

Press and hold the “UP” & “DOWN” & “SET” buttons and then press and re-

lease the “RESET” button. Then release the “Up”, “Down” & “Set buttons. You

will see the copyright and release notice on-screen.

Warning: Doing this will erase all your programming setups !!!

MASTER RESET APPENDIX D