Instruction manual

TDCT-Pro Time-Date-Character-Title

The title can be programmed either ON or OFF by selecting ON or OFF from

the TITLER sub-menu. A 20 characters title can be entered by selecting the

title from the programming menu.

3.7 Titler

Selecting titler in the programming menu displays the following menu on the

screen.

TITLER ON/OFF

TITLE

EXIT

Title

The TDCT-Pro gives you the option of a 20 character display for easy identi-

fication. To create a title, position the arrow in front of “TITLE” and press and

release “SET”. You will see a solid white box on the top screen. To change the

character in the first position, press the “UP” or “DOWN” buttons to cycle through

the alphanumeric selections from the following list of available characters:

ABCDEFGHIJKLMNOPQRSTUVWXYZ

0123456789 /*-+.,:’=!?)(

The solid white box is used for a blank space. Make your selection and press

and release “SET”. This will advance to the next block, repeat until you have

entered the desired title. When finished, simultaneously press and re-

lease the “DOWN” & “UP” buttons to enter your title into memory. The

white boxes will disappear and your title will be displayed as it will appear on

screen.

Note: Remember, enabling the TITLE will limit text insertions to 1 line

Figure 5: TITLER menu

3. PROGRAMMING