Instruction manual

72
Update Firmware
To update the firmware via the PC Programming software se-
lect the “Tool” pulldown menu and select “Load Firmware”.
The dialog box to the right will prompt you to select the path
and file name of the firmware you wish to update. Note that
the PC Programming Software is specific to the version of
software you are updating for actual programming the VSI-Pro
Max for selections, upload, download, T/D etc. However you
can use it to update any version of firmware to any VSI-Pro
Max but then can only use the OSD of the VSI-Pro Max for
programming.
VSI-Pro Max POS / Cash Register Interface
5. PROGRAMMING
Figure 188A Update Firmware Submenu
Figure 188B Update Firmware Connecting
Upon selecting a valid path and firmware file name another dialog warning box will appear to make sure you want to
update the firmware. Proceeding past this point will permanently erase the firmware in the VSI-Pro Max and connect with
the firmware update utility in the VSI-Pro Max and update the firmware. You will see the following progress boxes for
connecting and updating below.