Instruction manual

5. PROGRAMMING

DEST ID and SRC ID

Choices: 1 through 32

Note:The DEST ID and SRC ID can not be the same value or can not send any command.

Figure 159: DVR-3011,3021,MVDR3000,MVDR5000 Sub-Menu

DVR-3011 / DVR-3021 / MVDR3000 / MVDR5000

Press the “Up” or “Down” button to move the cursor to “DVR-3011,3021” and press “Set”. An asterisk appears to

indicate your selection.

DEST ID 1

SCR ID 32

EXIT

TIME SEARCH

Press the “Up” or “Down” button to move the cursor to “TIME SEARCH” and press “Set”. The following sub-menu

will appear:

DVR SELECTION

Press the “Up” or “Down” button to move the cursor to “DVR SELECTION” and press “Set”. The following menu will

appear:

VSI-Pro Max POS / Cash Register Interface

Use the “Up” or “Down” button to scroll to the desired exception in the transaction history. As you select the line the

exception string will display at the top of the page.

Then press “Set” and the DVR will be commanded by the VSI-Pro Max to go to the selected transaction via its Time/Date

Search function. Therefore you must make sure the T/D of the DVR is very close to the setting of the VSI-Pro Max or their

will be an effor in the actual search time. For the MVDR you should turn on T/D Locking and Time Sync so the clocks are

identical. Verify the proper connection to the DVR from the diagram on the following page.

EXAMPLE

Define “NO SALE” as an exception string In Exception No. 2 ,History Buffer to be “ON” ,Display to be “ON” and define

OPERATOR “IN”.If the screen is displayed “NO SALE” ,the VSI-Pro Max will keep this displayed line on Exception

History.

Figure 158: DVR Selection Sub-Menu

Figure 160: Display of TIME SEARCH

NONE

DMS-3001

DVR-3011,3021

MVDR3000, MVDR5000

EXIT

NO SALE

11:20:23 A 9/12/08

11:22:21 A 9/12/08

EXIT