Instruction manual

39
TITLER
To change the status of the on-screen titler, press the “Up” or “Down” button to move the cursor to “TITLER” and press
“Set”. The cursor will start flashing. Select either “ON” or “OFF” by pressing the “Up” or “Down” button. After making a
selection, press “Set”. This will return the cursor to the non-flashing mode. Now select “EXIT” to return to the previous
menu.
TITLE
The VSI-Pro Max gives you the option of a 40-character display for easy register identification in addition to the actual
register transaction data.
To create a title, press the “Up” or “Down” button to move the cursor to “TITLE” and press “Set”. You will see a row of 40
boxes and the first box will be flashing.
To change the character in the first position, press the “Up” or “Down” buttons to cycle through the alpha-numeric
selections from the following list of available characters.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz =:.+-*/9876543210
The solid white box is used for a blank space. Make your selection and press “Set”. This will advance to the next block,
repeat until you have entered the desired title. When finished, simultaneously press and release the “Down” & “Up”
buttons to enter your title into memory. The white boxes will disappear and your title will be displayed as it will appear on-
screen. Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.
Figure 146: ON-SCREEN TITLER Sub-Menu
TITLER OFF
TITLE
EXIT
VSI-Pro Max POS / Cash Register Interface
LANGUAGE ENGLISH
EXIT
NOTE



Remember, enabling the TITLE will limit text insertions to 10 lines maximum.
ON-SCREEN TITLER
Press the “Up” or “Down” button to move the cursor to “ON-SCREEN TITLER” and press “Set”. The following menu will
appear:
LANGUAGE SETTINGS
Selecting Language Settings will give you the following menu:
EXIT
Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.
The language selection options are English, German or Spanish.
Figure 147: Language Selection
If the TIME SYNC is turned ON, the “DEST ID” in MVDR3000/MVDR5000 sub-menu is identical with “COMM ID” or “UNIT
ID” of the DVR and the value of “SRC ID” in MVDR3000/MVDR5000 sub-menu as 32. Make sure that the time and date
format selected in the VSI-Pro Max is the same as the register’s time/date format. The VSI-Pro Max will monitor the
incoming data string which is transmitted from the cash register. If it finds a valid time and date in one or two consecutive
lines, it will set its internal clock to whatever time/date it finds. Then if Time Sync is ON will transmit this time/date to the
DVR to lock the DVR to the VSI-Pro Max which is locked to the cash register. Refer to Appendix R Page 96-97.
5. PROGRAMMING