Instruction manual

37
Figure 144: CLOCK Sub-Menu
5.4 SCREEN SETUP
Press the “Up” or “Down” button to move the cursor to “SCREEN SETUP” and press “Set”. The following
menu will appear:
Figure 143: SCREEN SETUP Sub-Menu
CLOCK
To program the clock's functions, press the “Up” or “Down” button to move the cursor to “CLOCK” and press “Set”. The
following menu will appear:
VSI-Pro Max POS / Cash Register Interface
5. PROGRAMMING
T/D DISPLAY ON
TIME FORMAT 12 HOUR
DATE FORMAT MM/DD/YY
DAYLIGHT SAVING DISABLED
SET TIME / DATE
RESET TIME / DATE
T/D LOCKING
EXIT
TEXT GRAYSCALE
BLACKGROUND GRAYSCALE
HORIZONTAL POSITION
VERTICAL POSITION
CLOCK
ON-SCREEN TITLER
LANGUAGE SETTINGS
EXIT
TEXT GRAYSCALE
To change the grayscale of the text on screen, press the “Up” or “Down” button to move the cursor to “TEXT GRAYSCALE”
and press “Set”. Cycle through the selections by pressing the “Up” or “Down” buttons. There are 8 settings to choose
from peak white to black black. Make your selection and press “Set” to return to the previous menu.
BACKGROUND GRAYSCALE
To change the display background grayscale of the text on screen, press the “Up” or “Down” button to move the cursor to
“BACKGROUND GRAY SCALE” and press “Set”. Cycle through the selections by pressing the “Up” or “Down” buttons.
There are 8 settings to choose from white to black. Make your selection and press “Set” to return to the previous menu.
HORIZONTAL POSITION
To change the horizontal position of the inserted text on-screen, press the “Up” or “Down” button to move the cursor to
“HORIZONTAL POSITON” and press “Set”. Press the “Up” or “Down” buttons to move the text to the desired horizontal
position.
VERTICAL POSITION
To change the vertical position of the inserted text on-screen, press the “Up” or “Down” button to move the cursor to
“VERTICAL POSITION” and press “Set”. Press the “Up” or “Down” buttons to move the text to the desired vertical
position.
NOTE



Upon powering up for the first time or when the battery becomes depleted, the on-screen
Time / Date display may be incorrect or have unreadable characters. If this is the case,
enter the clock menu and “Reset Time / Date”. The Time / Date will then show readeable
characters and be unaffected by a Master Reset.