Instruction manual

24
Figure 54: GILBARCO Sub-Menu
GILBARCO
Press the “Up” or “Down” button to move the cursor to
“GILBARCO” and press “Set”. The GILBARCO menu will
appear:
PC G-SITE
TCRG / 2
TCR 15 G [ OLD FMT ]
TCR 15 G [ NEW FMT ]
PASSPORT
PASSPORT [XML FMT]
EXIT
NOTE: Selecting PASSPORT [XML FMT] requires the
addition of the AVE UART Daughter board that emulates
the 16550 UART for 7 bit communication. However the
Gilbarco Passport can be set for any baud rate, bits and
parity which will work directly with the VSI-Pro Max but
the Gilbarco dealers normally only set for 7 bit , no parity
so requires the AVE UART daughter board.
DISPLAY MIXED
EXIT
Figure 56: IBM 3151 TERMINAL Sub-Menu
DISPLAY
Choices: JOURNAL, RECEIPT, MIXED
IBM 3151 TERMINAL
Press the “Up” or “Down” button to move the cursor to
“IBM 3151 TERMINAL” and press “Set”. The IBM 3151
TERMINAL menu will appear:
IBM
Press the “Up” or “Down” button to move the cursor to
“IBM” and press “Set”. The IBM menu will appear:
DISPLAY JOURNAL
EXIT
Figure 57: IBM RDS Sub-Menu
RDS
Press the “Up” or “Down” button to move the cursor to
“RDS ” and press “Set”. The RDS menu will appear:
DISPLAY
Choices: JOURNAL, RECEIPT, MIXED
Figure 55: IBM Sub-Menu
IBM3151 TERMINAL
4614
46XX
4840-532
RDS
REDWOOD 538
SURE POS / 500
EXTERNAL CUSTOM DISPLAY
4610TF6
EXIT
Figure 58: 4610TF6 Sub-Menu
4610TF6
Press the “Up” or “Down” button to move the cursor to
“4610TF6 ” and press “Set”. The 4610TF6 menu will ap-
pear:
TAP
EMULATE
EXIT
VSI-Pro Max POS / Cash Register Interface
- - - - PREVIOUS PAGE
GILBARCO
HERO 9400
HERTZ
HTEC
HUTH T400 / T500
IBM
ICL
I-CNTRL INT JAVELIN VIPER
- - - - NEXT PAGE
EXIT
5. PROGRAMMING
Figure 53: Register Selection Menu Page 5