Instruction manual

19
TCP/IP Limitations
The TCPIP232 Adapter can monitor any Ethernet LAN
either 10MBs or 100MB/s. However the actual burst
throughput of the adpater is limited to 5MB/s. This is more
than enough for network printers for cash receipts, bar
code scanners or single cash registers that operate in a
“Live Mode”. Live Mode means the register transmits the
data on the network line by line or at the end of each
transaction.
Some cash registers have large local built in memories
for thousands of items and then only batch multiple trans-
actions on the network at any given time or controlled by
the server. Cash Registers utilizing this kind of batch pro-
cessing are not suitable for security monitoring because
the data is not Live. Other devices that output large
amounts of data will overrun the buffers of either the
TCPIP232 Adapter or VSI-Pro Max and data will be lost
and would not be suitable for security monitoring any-
way.
The VSI-Pro Max has a set of powerful data dump modes
that are compatible with the TCPIP232 Adpater. If large
data packets need filtering or special formats are required
contact the factory.
VSI-Pro Max POS / Cash Register Interface
5. PROGRAMMING
SET ADDRESS ANY
EXIT
Figure 15: ADDRESSABLE VSI Sub-Menu
SET ADDRESS
Choices: ANY, 1, 2, 3,..., 253, 254, 255
NOTE: See Appendix Q Page 95 for more information
on the VSI-ADD Protocol.
ADDRESSABLE VSI (VSI-ADD)
Press the “Up” or “Down” button to move the cursor to
“ADDRESSABLE VSI” and press “Set”. The ADDRESS-
ABLE VSI menu will appear:
DISPLAY RECEIPT
EXIT
Figure 16: ADS Sub-Menu
DISPLAY
Choices:JOURNAL, RECEIPT
ADS
Press the “Up” or “Down” button to move the cursor to
“ADS” and press “Set”. The ADS menu will appear.
ANSI
Press the “Up” or “Down” button to move the cursor to
“ANSI” and press “Set”.
This selects an ANSI driver for the VSI-Pro Max. In this
mode standard ANSI terminal commands sent to the VSI-
Pro Max will control the display of the data on the screen.
NOTE: See Appendix I Page 83 for a detailed list of ANSI
commands supported.
BLEEP
Press the “Up” or “Down” button to move the cursor to
“BLEEP” and press “Set”.
CASH COUNTER
Press the “Up” or “Down” button to move the cursor to
“CASH COUNTER” and press “Set”.
TS5000
TS7000
EXIT
GLORY GFR-220
JETSORT
EXIT
Figure 18: Bleep Sub-Menu
Figure 19: Cash Counter Sub-Menu
Select Glory GFR-220 and the following menu selections
are available.
Figure 20: Glory GFR-220 Sub-Menu
- - - - PREVIOUS PAGE
BLEEP
CAP SOFTWARE
CAPTIVA
CASH COUNTER
CASIP
CLARITY EPOS
COMPAQ NISASCAN
DATASYM 600
- - - - - - - - - NEXT PAGE
EXIT
Figure 17: REGISTER SELECT Sub-Menu Page 2
PRINTER OUTPUT
EXTERNAL DISPLAY EMULATE
EXIT