Instruction manual

89
LIMITED WARRANTY APPENDIX P
VSI-Pro VIDEO SERIAL INTERFACE
LIMITED WARRANTY
(Terms and Conditions)
For 2 Years from the date of shipment, Seller warrants to Buyer that the Product is free from defects in material or
workmanship under normal use and service. Equipment manufactured by other than Seller but furnished by Seller
carries the same warranty to Buyer as Seller receives from the other manufacturer, notwithstanding any provision to
the contrary. If Buyer has specified a particular manufacturer’s product which is not the brand standardly supplied by
Seller, Buyer shall look only to the other manufacturer’s warranty and Seller shall not warrant such item.
EXCLUSIONS. Seller’s warranty does not cover the following :
1. In-transit damage claims, improper handling by carrier or post office.
(Only the consignee of the shipment can file a claim with the common carrier.)
2. Damages caused by incorrect use, modification, carelessness, improper storage, hostile operating conditions,
or unauthorized service, installation or repairs without proper training from the Seller.
3. Damages caused by fire, flood, lightning, collision, acts of God or other events beyond the control of Seller.
4. Products or parts thereof that have had serial numbers removed, altered or defaced.
5. Products returned without an RMA number and sales or delivery receipt showing the date of original purchase.
6. Use of components that do not meet Seller’s specifications.
7. External parts such as cabinets or keypads.
8. Periodic maintenance and adjustments resulting from normal use.
If you have difficulty entering the main-menu or you changed EPROMS in your VSI-Pro, do the following procedure
exactly: Lightly press and hold in the 3 buttons to the left (“Up”, “Down” & “Set”). While holding down these buttons,
press and release the “Reset” button. Then release the other buttons. Wait a few seconds and the copyright notice
will appear on-screen along with the version of software installed in your VSI-Pro.
Upon powering up the VSI-Pro for the first time, if the battery is depleted the master reset should be done. However
in some cases the Time/Date display may not have the correct or legible characters. If this occurs, go to the Clock
programming section of the menu and reset the clock and program the correct time. The Time/Date display will then
function properly and any subsequent master resets will not affect the time.
WARNING!
DOING A MASTER RESET CLEARS ALL PROGRAMMING AND
THE VSI-PRO DEFAULTS TO THE FACTORY SETTINGS.
MASTER RESET APPENDIX O