Instruction manual

82
VSI-Pro VIDEO SERIAL INTERFACE
Press the “Up” or “Down” button to move the cursor to “DEST ID” and press “Set”. The cursor will start flashing. Press the
“Up” or “Down” button to change the value and press “Set” when the value of the “DEST ID” as identical with the “COMM
ID” or “UNIT ID” of the DVR, then move the cursor to “SRC ID” and press “Set”. The cursor will start flashing. Press the
“Up” or “Down” button to change the value of “SRC ID” as 32 and press “Set” then back to the Main Menu.
Figure 149: MVDR3000/MVDR5000 Sub-Menu
Time Sync and Alarm Sync Feature within the VSI-Pro and MVDR3000/MVDR5000 or compatible DVRs
To enable the Time Sync function. Access to the “SCREEN SETUP” menu, select the “CLOCK” sub-menu then select
the “T/D LOCKING” sub-menu and then turns the Time Sync as “ON” then back to the Main Menu. Access to the
“EXCEPTION REPORT” menu ,select the “EXCEPTION HISTORY” sub-menu then select the “DVR SELECTION” sub-
menu and then select the “MVDR3000/5000” sub-menu. To enable MVDR3000/5000 support the TIME SYNC function,
set the “DEST ID” as identical with the “COMM ID” or “UNIT ID” of the DVR and set the “SRC ID” as 32.
DEST ID 1
SRC ID 32
EXIT
Figure 150: Connection Diagram of VSI-Pro and Cash Register with MVDR3000/5000
VSI-Pro with Alarm Sync Function for MVDR3000/5000
If an any alarm of the VSI-Pro is triggered and the Alarm Sync function is enabled. The VSI-Pro will send command to
DVR to trigger an alarm condition on the DVR.
To enable the Alarm Sync function. Access the Main Menu, press the “Up” or “Down” button to move the cursor to
“ALARM OUTPUTS” and press “Set” then move the cursor to “ALARM SYNC” and press “Set”. the cursor will start
flashing. Press the “Up” or “Down” button to change the value is “ON” and press “Set” then back to Main Menu. Access
to the “EXCEPTION REPORT” menu ,select the “EXCEPTION HISTORY” sub-menu then select the “DVR SELECTION”
sub-menu and then select the “MVDR3000/5000” sub-menu. To enable MVDR3000/5000 support the ALARM SYNC
function, set the “DEST ID” as identical with the “COMM ID” or “UNIT ID” of the DVR and set the “SRC ID” as 32.
VSI-Pro with Time Sync Function for MVDR3000/5000
If the transaction which include time and date is sent out from the Cash Register and received by the VSI-Pro has
occurred and The Time Sync function is enabled. The time and date of a DVR will synchronize with the time and date of
a VSI-Pro.
APPENDIX L TIME SYNC and ALARM SYNC
CAMERA
MONITOR
VSI-Pro
VIDEO OUT
VIDEO IN
RG-59U
CASH REGISTER
VIDEO OUT
VIDEO IN
RG-59U
RG-59U
VIDEO IN
Cash Register DB9F VSI-Pro DB9M
3 ------------------------------ 2
5 ------------------------------ 5
RS-485 Cash Register VSI-Pro DB9M
A ------------------------------ 4
B ------------------------------ 6
VSI-Pro DB9M DVR DB9F
3 ------------------------- 2
5 ------------------------- 5