Instruction manual

VSI-Pro Firmware Download Menu

To update firmware of the VSI-Pro, load the VSI-Pro Firmware Download Utility and follow the instructions below. Then

select “DOWNLOAD/UPLOAD SETUP” from the Main Programming Menu.

VSI-Pro Firmware Download Function

This document describes the VSI-Pro V13.00 Release 12. The new features of this version are able to download firmware

update via the RS-232 port. The LDROM 4K boot strap loader must be burner to the uP via a conventional programmer.

Then the executable program is then loaded via any terminal program such as Hyper Terminal via a PC or compatible

device. All firmware files are encoded to the AVE proprietary format and decoded by the bootstrap loader for standard

program execution.

Update Firmware of VSI-Pro

You have to connect the VSI-Pro with a Serial Program Terminal such as HyperTerminal, IC etc. But advise to use

HyperTerminal.First, you have to set the baud rate HyperTerminal to 19200

See PC Windows below to verify proper HyperTerminal setup.

Figure 103: HyperTerminal Main Menu

VSI-Pro VIDEO SERIAL INTERFACE

Figure 102: Download/Upload Setup

PROGRAMMING

DOWNLOAD SETUP

UPLOAD SETUP

UPDATE FIRMWARE

EXIT