Instruction manual

VSI-Pro VIDEO SERIAL INTERFACE

Figure 74: DVR-3011 ,3021 and MVDR3000/MVDR5000 Sub-Menu

DVR-3011, DVR-3021 or MVDR3000, MVDR5000

Press the “Up” or “Down” button to move the cursor to “DVR-3011.3021” or “MVDR3000/5000” and press “Set”. An

asterisk appears to indicate your selection.

TIME SEARCH

Press the “Up” or “Down” button to move the cursor to “TIME SEARCH” and press “Set”. The following sub-menu will

appear:

Figure 73: DVR Selection Sub-Menu

DVR SELECTION

Press the “Up” or “Down” button to move the cursor to “DVR SELECTION” and press “Set”. The following menu will

appear:

Figure 75: Display of TIME SEARCH

Use the “Up” or “Down” button to scroll to the desired exception in the transaction history. As you select the lline the

exception string will display at the top of the page.

Then press “Set” and the DVR will be commanded by the VSI-Pro to go to the selected transaction via its Time/Date

Search function. Therefore you must make sure the T/D of the DVR is very close to the setting of the VSI-Pro or their will

be an effor in the actual search time. Verify the proper connection to the DVR from the diagram on the following page.

EXAMPLE

Define “NO SALE” as an exception string In Exception No. 2 , History Buffer to be “ON” , DISPLAY to be “ON”, and define

OPERATOR “IN”.If the screen is displayed “NO SALE”, the VSI-Pro will keep this displayed line on Exception History.

DEST ID and SRC ID

Choices: 1 through 32 Note:The DEST ID and SRC ID can not be the same value or can not send any command.

NO SALE

11:20:23 A 9/12/08

11:22:21 A 9/12/08

EXIT

DSM-3001

DVR-3011 ,3021

MVDR3000/MVDR5000

EXIT

DEST ID 1

SRC ID 32

EXIT

PROGRAMMING