Instruction manual

32
PROGRAMMING
TITLER
To change the status of the on-screen titler, press the “Up” or “Down” button to move the cursor to “TITLER” and
press “Set”. The cursor will start flashing. Select either “ON” or “OFF” by pressing the “Up” or “Down” button. After
making a selection, press “Set”. This will return the cursor to the non-flashing mode. Now select “EXIT” to return to
the previous menu.
TITLE
The VSI-Pro gives you the option of a 40-character display for easy register identification in addition to the actual
register transaction data.
To create a title, press the “Up” or “Down” button to move the cursor to “TITLE” and press “Set”. You will see a row of
40 boxes and the first box will be flashing.
To change the character in the first position, press the “Up” or “Down” buttons to cycle through the alpha-numeric
selections from the following list of available characters.
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz =:.+-*/9876543210
The solid white box is used for a blank space. Make your selection and press “Set”. This will advance to the next
block, repeat until you have entered the desired title. When finished, simultaneously press and release the “Down” &
“Up” buttons to enter your title into memory. The white boxes will disappear and your title will be displayed as it will
appear on-screen. Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the
previous menu.
EXIT
Press the “Up” or “Down” button to move the cursor to “EXIT” and press “Set” to return to the previous menu.
5.5 TEXT DISPLAY
This menu will give you more control over the actual text block formatting and its appearance on the screen.Toaccess
the menu, press the “Up” or “Down” button to move the cursor to “TEXT DISPLAY” and press “Set”. The following sub-
menu will appear:
VSI-Pro VIDEO SERIAL INTERFACE
Figure 67: ON-SCREEN TITLER Sub-Menu
TITLER OFF
SET TITLE
EXIT
NOTE



Remember, enabling the TITLE will limit text insertions to 10 lines maximum.
ON-SCREEN TITLER
Press the “Up” or “Down” button to move the cursor to “ON-SCREEN TITLER” and press “Set”. The following menu will
appear:
If the TIME SYNC is turned on, the “DEST ID” in MVDR3000/MVDR5000 sub-menu as identical with “COMM ID” or “UNIT
ID” of a DVR and the value of “SRC ID” in MVDR3000/MVDR5000 sub-menu as 32, make sure that the time and date
format selected is the same as the register’s time/date format. The support DVR will monitor the incoming data string
which transmitted from the cash register. If it finds a valid time and date in one or two consecutive lines, it will set the
clock to whatever time/date it finds.