Instruction manual

31
T/D DISPLAY turns the time/date display on or off. Press the “Up” or “Down” button to move the cursor to “T/D DISPLAY”
and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between “ON” or “OFF” and
press “Set” when the desired value is displayed.
TIME DISPLAY selects either 12-hour AM/PM or 24-hour Military Time format with AM/PM. Press the “Up” or “Down”
button to move the cursor to “TIME DISPLAY” and press “Set”. The cursor will start flashing. Press the “Up” or “Down”
button to toggle between time formats and press “Set” when the desired format is displayed.
DATE FORMAT chooses one of the three available formats. Press the “Up” or “Down” button to move the cursor to “DATE
FORMAT” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between date
formats and press “Set” when the desired format is displayed.
DAYLIGHT SAVING selects, for example, USA, Canada, Australia or is disabled. Press the “Up” or “Down” button to
move the cursor to “DAYLIGHT SAVING” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button
to toggle between values and press “Set” when the desired value is displayed.
SET TIME/DATE sets the clock manually. Press the “Up” or “Down” button to move the cursor to “SET TIME/DATE” and
press “Set”. The time/date will appear and the cursor will start flashing. Press the “Up” and “Down” button to change the
value and press “Set” when the desired value is displayed. The value is selected and the cursor will advance to the next
position. When the desired time/date is displayed, press the “Up” and “Down” buttons simultaneously to enter the time/
date into memory and return to the previous menu.
RESET TIME/DATE resets the clock to the default value. Press the “Up” or “Down” button to move the cursor to “RESET
TIME/DATE” and press “Set” to reset the time/date.
VSI-Pro VIDEO SERIAL INTERFACE
PROGRAMMING
DISPLAY turns the T/D locking feature on or off. If on then will lock the T/D of the VSI- Pro to the incoming POS data. If
turned off then will not lock and use the free running clock of the VSI-Pro. Press the “Up” or “Down” button to move the
cursor to “DISPLAY” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to toggle between
“ON” or “OFF” and press “Set” when the desired value is displayed.
If the DISPLAY is turned on, make sure that the time and date format selected is the same as the register’s time/date
format. The VSI-Pro will monitor the incoming data string. If it finds a valid time and date in one or two consecutive lines,
it will set the clock to whatever time/date it finds. A valid time has the following formats:
DISPLAY ON
TIME SYNC ON
EXIT
Figure 66: T/D LOCKING Sub-Menu
T/D LOCKING
To program the time synchronizing functions, press the “Up” or “Down” button to move the cursor to “T/D LOCKING” and
press “Set”. The following menu will appear:
HH:MM, HH:MM:ss
HH:MM AM, HH:mm:ss AM
HH:MM PM, HH:MM:ss PM
Where HH is a number between 0 and 12 ( 24 if either AM or PM not present )
A valid date has the same format as for date display and has either “/” or “-" as a separator.
TIME SYNC turns the TIME SYNC on or off. This is special protocol that will communicate to a compatible DVR to lock
their T/D to the VSI-Pro. This is currently supported by the AVE MVDR line of DVRs. Press the “Up” or “Down” button
to move the cursor to “TIME SYNC” and press “Set”. The cursor will start flashing. Press the “Up” or “Down” button to
toggle between “ON” or “OFF” and press “Set” when the desired value is displayed.