Instruction manual

29
VSI-Pro VIDEO SERIAL INTERFACE
NOTE



As we continually add new registers, these
menus are subject to change.
UP3000
Version of the VSI-Pro that support: V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“UP3000” and press “Set”. No menu will apprear and merely
sets the VSI-Pro to support the special protocol of this
model.
VSI-DRS
Version of the VSI-Pro that support: V13.00. This is the
interface to the older stype TEC Slip Printers using
the DRS communication.
Press the “Up” or “Down” button to move the cursor to
“VSI-DRS” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
WEIGHSCALE
Version of the VSI-Pro that support: V13.10, V13.24 and
V13.34.
Press the “Up” or “Down” button to move the cursor to
“WEIGH SCALE” and press “Set”. The WEIGH SCALE
menu will appear:
Figure 63: WEIGH SCALE Sub-Menu
AVERY
MOLENS
LEON LD5204
VISHAY WEIGHBRIDGE
Version of the VSI-Pro that support: V13.10.
Press the “Up” or “Down” button to move the cursor to
“VISHAY WEIGHBRIDGE” and press “Set”. The VISHAY
WEIGHBRIDGE menu will appear:
Figure 62: VISHAY WEIGHBRIDGE Sub-Menu
Figure 61: VERIFONE Sub-Menu
VERIFONE
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“VERIFONE” and press “Set”. The VERIFONE menu will
appear:
UP3000/3300
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“UP3000/3300” and press “Set”. The UP3000/3300 menu
will appear:
TERMINAL
Choices: ANY, 1, 2, 3,..., 15, 16
Figure 60: UP3000/3300 Sub-Menu
TERMINAL ANY
EXIT
JOURNAL TAPPING
RECEIPT TAPPING
JOURNAL EMULATING
RECEIPT EMULATING
W.OUT
W.OUT2
PROGRAMMING
NOTE:The special DRSMOD must be installed in place
of the RS-232 (U5) chip. The special cable must also be
used. Please contact AVE.