Instruction manual

27
VSI-Pro VIDEO SERIAL INTERFACE
SPEDI CCTV
Version of the VSI-Pro that support: V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“SPEDI CCTV ” and press “Set”. The SPEDI CCTV menu
will appear:
Figure 54: SPEDI CCTV Sub-Menu
SET ADDRESS
Choices: ANY, 1, 2, 3,..., 255
SQUIRREL
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“SQUIRREL” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
TEAM POS 2000 - CBE
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“TEAM POS 2000 - CBE” and press “Set”. No menu will
apprear and merely sets the VSI-Pro to support the spe-
cial protocol of this model.
TEAM POS 2000 - ISTORE
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“TEAM POS 2000 - ISTORE” and press “Set”. No menu
will apprear and merely sets the VSI-Pro to support the
special protocol of this model.
SET ADDRESS ANY
EXIT
STAR EPOS
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“STAR EPOS” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
Figure 55: SUNTRONIC Sub-Menu
SUNTRONIC
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“SUNTRONIC” and press “Set”. The SUNTRONIC menu
will appear.
890,891,960
2000
SWEDA 54XX
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“SWEDA 54XX” and press “Set”. No menu will apprear
and merely sets the VSI-Pro to support the special proto-
col of this model.
SWINTEC 2250
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“SWINTEC 2250” and press “Set”. No menu will apprear
and merely sets the VSI-Pro to support the special proto-
col of this model.
Figure 56: TCI Sub-Menu
TCI
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“TCI” and press “Set”. The TCI menu will appear:
When finished,simultaneously press and release the “Up”
& “Down” buttons to save the device address configura-
tion.
DEVICE ADDRESS
Choices : 000, 001, 002,..., 999
DEVICE ADDRESS 000
EXIT
PROGRAMMING