Instruction manual

26
PROGRAMMING
VSI-Pro VIDEO SERIAL INTERFACE
SHARP ER-A410/420
Version of the VSI-Pro that support: V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“SHARP ER-A410/420” and press “Set”. The SHARP ER-
A410/420 menu will appear:
Figure 51: SHARP ER-A410/420 Sub-Menu
SHARP 750 ER-01PU
Version of the VSI-Pro that support: V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“SHARP 750 ER-01PU” and press “Set”. The SHARP 750
ER-01PU menu will appear:
Figure 50: SHARP 750 ER-01PU Sub-Menu
DISPLAY
Choices: RECEIPT, JOURNAL
SHARP UP600/700
Version of the VSI-Pro that support: V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“SHARP UP600/700” and press “Set”. The SHARP
UP600/700 menu will appear:
Figure 52: SHARP UP600/700 Sub-Menu
Figure 49: SHARP Sub-Menu
SHARP
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“SHARP” and press “Set”. The SHARP menu will appear.
2590
3100,3110
3220,3221,3250
3310,3311,3550
A-410,A-420
A-460,A-470
A-520,A-530
A-550,A-570
A-610,A650
A-750
A-770
UP600/700
NOTE: A-410,A-420 and UP600/700 are supported by
VSI-Pro version 13.10 ONLY
SHOPMATE
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“SHOPMATE” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
DISPLAY RECEIPT
EXIT
TAP
EMULATE
TAP US
EMULATE US
TAP
EMULATE
Figure 53: SICOM Sub-Menu
SECNET ADDRESS
Choiecs: ANY, 1, 2, 3,..., 255
SICOM
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“SICOM ” and press “Set”. The SICOM menu will appear:
SECNET ADDRESS 8
EXIT
SIEMENS BEETLE i815ES
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“SIEMENS BEETLE i815ES” and press “Set”. No menu
will apprear and merely sets the VSI-Pro to support the
special protocol of this model.