Instruction manual

22
PROGRAMMING
VSI-Pro VIDEO SERIAL INTERFACE
Press the “Up” or “Down” button to move the cursor to
“MICROS ISN NETWORK” and press “Set”. The MICROS
ISN NETWORK menu will appear:
Figure 36: MICROS ISN NETWORK Sub-Menu
SOURCE TYPE
Choices: ANY, 00, 01, 02 ,03,..., 09
SRC ISN GNA
Choices: ANY, 00, 01, 02, 03,..., 32
SRC ISN LNA
Choices: ANY, 00, 01, 02, 03,..., 32
SRC IDN ID
Choices: ANY, 00, 01, 02, 03,..., 15
DESTIN TYPE
Choices: ANY, 00, 01, 02, 03,..., 09
DST ISN GNA
Choices: ANY, 00, 01, 02, 03,..., 32
DST ISN LNA
Choices: ANY, 00, 01, 02, 03,..., 32
DST IDN ID
Choices: ANY, 00, 01, 02, 03,..., 15
Figure 35: MICROS IDN NETWORK Sub-Menu
DEVICE
Choices: PRINTER, VIDEO
DEVICE ADDRESS
Choices: ANY, 01, 02, 03,...,13, 14, 15
MODE
Choices: EMULATE,TAP ( SEE NOTE )
Figure 34: MICROS Sub-Menu
Figure 33: MICRELEC 9500 Sub-Menu
Press the “Up” or “Down” button to move the cursor to
“MICRELEC 9500” and press “Set”. The MICRELEC9500
menu will appear:
MICROS
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“MICROS” and press “Set”. The MICROS menu will ap-
pear:
Figure 32: MICRELEC MS SERIES Sub-Menu
Press the “Up” or “Down” button to move the cursor to
“MICRELEC MS SERIES” and press “Set”. The
MICRELEC MS SERIES menu will appear:
Press the “Up” or “Down” button to move the cursor to
“MICROS IDN NETWORK” and press “Set”. The MICROS
IDN NETWORK menu will appear:
Figure 31: MICRELEC Sub-Menu
MICRELEC
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“MICRELEC” and press “Set”. The MICRELEC menu will
appear:
MICRELEC MS SERIES
MICRELEC 9500
EXIT
OPERATOR
CUSTOMER
COMBINED
EXIT
JOURNAL
RECEIPT
CHECK
CREDIT
EXIT
LOCAL VSS
MICROS IDN NETWORK
MICROS ISN NETWORK
EXIT
DEVICE : PRINTER
DEVICE ADDRESS: ANY
MODE: TAP
EXIT
SOURCE TYPE: ANY
SRC ISN GNA : ANY
SRC ISN LNA : ANY
SRC IDN ID : ANY
DESTIN TYPE : ANY
DST ISN GNA : ANY
DST ISN LNA : ANY
DST IDN ID : ANY
EXIT