Instruction manual

21
VSI-Pro VIDEO SERIAL INTERFACE
HTEC
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“HTEC” and press “Set”. No menu will apprear and merely
sets the VSI-Pro to support the special protocol of this
model.
HUTH T400/T500
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“HUTH T400/T500” and press “Set”. No menu will apprear
and merely sets the VSI-Pro to support the special proto-
col of this model.
HERTZ
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“HERTZ” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
KOPPENS GASPUMP
Version of the VSI-Pro that support: V13.24.
Press the “Up” or “Down” button to move the cursor to
“KOPPENS GASPUMP” and press “Set”. No menu will
apprear and merely sets the VSI-Pro to support the spe-
cial protocol of this model.
JETSORT
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“JETSORT” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
MEMS-5
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“MEMS-5” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
MICROMAX
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“MICROMAX” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
Figure 29: IBM 3151 TERMINAL Sub-Menu
IBM 3151 TERMINAL
Version of the VSI-Pro that support: V13.00, V13.10.
Press the “Up” or “Down” button to move the cursor to
“IBM 3151 TERMINAL” and press “Set”. The IBM 3151
TERMINAL menu will appear:
DISPLAY MIXED
EXIT
DISPLAY
Choices: JOURNAL, RECEIPT, MIXED
MICROPOS
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“MICROPOS” and press “Set”. No menu will apprear and
merely sets the VSI-Pro to support the special protocol
of this model.
Figure 30: IBM RDS Sub-Menu
DISPLAY
Choices: JOURNAL, RECEIPT
IBM RDS
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“IBM RDS ” and press “Set”. The IBM RDS menu will
appear:
DISPLAY JOURNAL
EXIT
PROGRAMMING