Instruction manual

20
PROGRAMMING
VSI-Pro VIDEO SERIAL INTERFACE
MODEL
Choices: E9010, E90
Figure 24: EDACOM Sub-Menu
EDACOM
Version of the VSI-Pro that support: V13.00, V13.24 and
V13.34.
Press the “Up” or “Down” button to move the cursor to
“EDACOM” and press “Set”. The EDACOM menu will
appear:
EPSON GENERIC
Version of the VSI-Pro that support: V13.10, V13.24 and
V13.34.
Press the “Up” or “Down” button to move the cursor to
“EPSON GENERIC” and press “Set”. The EPSON GE-
NERIC menu will appear:
Figure 25: EPSON GENERIC Sub-Menu
ELCA
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“ELCA” and press “Set”. No menu will apprear and merely
sets the VSI-Pro to support the special protocol of this
model.
Figure 27: GASBOY Sub-Menu
DEVICE
Choices: PRINTER, CONSOLE,CSL OLD
DEVICE ADDRESS
Choices: ANY, 01, 02, 03,..., 17
GASBOY
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“GASBOY” and press “Set”. The GASBOY menu will ap-
pear:
FUJITSU 9920
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“FUJITSU 9920” and press “Set”. The FUJITSU 9920 menu
will appear:
Figure 26: FUJITSU 9920 Sub-Menu
DISPLAY
Choices: JOURNAL, RECEIPT
GLORY GFR-220
Version of the VSI-Pro that support: V13.00, V13.10,
V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“GLORY GFR-220” and press “Set”. No menu will apprear
and merely sets the VSI-Pro to support the special proto-
col of this model.
MODEL E90
EXIT
STANDARD
ESSO POLE DISPLAY
PRINTER WITH POLE
DOUBLE CHAR PRINTER
POLE DISPLAY
POLE DISPLAY 20
POLE VIA PRINTER
RECIEPT PRINTER ONLY
JOURNAL PRINTER ONLY
SLIP PRINTER ONLY
GRAPHIC FILTER
EXIT
DISPLAY JOURNAL
EXIT
DEVICE CONSOLE
DEVICE ADDRESS 01
EXIT
Figure 28: GILBARCO Sub-Menu
GILBARCO
Version of the VSI-Pro that support: V13.00 and V13.10.
Press the “Up” or “Down” button to move the cursor to
“GILBARCO” and press “Set”. The GILBARCO menu will
appear:
PC G-SITE
TCRG / 2
TCR 15 G [ OLD FMT ]
TCR 15 G [ NEW FMT ]
PASSPORT POLE DISP
PASSPORT [ XML FMT ]
Note: When select PASSPORT[XML FMT] Menu the VSI-
Pro require the UART Module. See Appendix K (Page 79)