Instruction manual

19
VSI-Pro VIDEO SERIAL INTERFACE
CASIO VIDEO SYSTEM
Version of the VSI-Pro that support: V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“CASIO VIDEO SYSTEM” and press “Set”. No menu will
apprear and merely sets the VSI-Pro to support the spe-
cial protocol of this model.
Figure 23: NUCLEUS Sub-Menu
Figure 21: DRESSER WAYNE Sub-Menu
Figure 22: POS / CDU Sub-Menu
DRESSER WAYNE
Version of the VSI-Pro that support: V13.00, V13.10, and
V13.24.
Press the “Up” or “Down” button to move the cursor to
“DRESSER WAYNE” and press “Set”. The DRESSER
WAYNE menu will appear:
Press the “Up” or “Down” button to move the cursor to
“POS / CDU” and press “Set”. The POS / CDU menu will
appear:
NUCLEUS
Press the “Up” or “Down” button to move the cursor to
“NUCLEUS” and press “Set”. The NUCLEUS menu will
appear:
POS / CDU
NUCLEUS
JOURNAL PRINTER
RECEIPT PRINTER
Terminal 1
Terminal 2
Terminal 3
Terminal 4
Terminal 5
Terminal 6
Terminal 7
Terminal 8
Figure 20: DELTA SONO 3.1 Sub-Menu
DELTA SONO 3.1
Version of the VSI-Pro that support: V13.00.
Press the “Up” or “Down” button to move the cursor to
“DELTA SONO 3.1” and press “Set”. The DELTA SONO
3.1 menu will appear:
DELTA JOURNAL
DELTA RECEIPT
EPSON JOURNAL
EPSON RECEIPT
EXIT
Figure 17: CASIO TE-2200 Sub-Menu
CASIO TE2200
Version of the VSI-Pro that support: V13.10, V13.24 and
V13.34.
Press the “Up” or “Down” button to move the cursor to
“CASIO TE-2200” and press “Set”. The CASIO TE-2200
menu will appear:
MODE
Choices: TAPPING, EMULATING
MODEL : TE-2200
MODE : EMULATING
EXIT
MODE
Choices: TAPPING, EMULATING
CASIO TK-T500
Version of the VSI-Pro that support: V13.10, V13.24 and
V13.34.
Press the “Up” or “Down” button to move the cursor to
“CASIO TK-T500” and press “Set”. The CASIO TK-T500
menu will appear:
Figure 18: CASIO TK-T500 Sub-Menu
MODEL : TK-T500
MODE : EMULATING
EXIT
CLALITY EPOS
Version of the VSI-Pro that support: V13.24 and V13.34.
Press the “Up” or “Down” button to move the cursor to
“CLALITY EPOS” and press “Set”. The CLALITY EPOS
menu will appear:
Figure 19: CLARITY EPOS Sub-Menu
SET TERM NO.
Choices: ALL, 1, 2, 3,..., 253, 254, 255
SET TERM NO ALL
EXIT
PROGRAMMING