Specifications

T: 713-686-8409 | F: 713-686-8509 | www.aveusa.com | [e-mail]
47
Control Products
8 PSWT, 4 PSWT, 2 PSWT
Switchers
The 8PSWT is an eight position position alarming, homing, bypassing sequential video switcher. Two alarm inputs
via rear cage clamp connectors allow homing to camera 4 or camera 8 in a manual mode. Upon release of the
alarm inputs, the switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators
show which camera is currently being homed.
The three position toggle switches allow instant manual homing, camera bypassing except upon alarm, and auto
sequencing mode. There are two separate recessed dwell pots to control the dwell time of cameras 1-4 and 5-8
independently. The 8PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.
A B
The 4PSWT is a four position alarming, homing, by passing sequential video switcher. One alarm input via a
rear cage clamp connector allows homing to camera 4 in a manual mode. Upon release of the alarm input, the
switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators show which
camera is currently being homed.The three position toggle switchers allow instant manual homing, camera by
passing except upon alarm, and auto sequencing mode. There is a recessed Dwell pot on the front panel to
adjust the dwell time from approximately 1 second to 30 seconds. The 4PSWT is powered by 9-12VDC and is
supplied with a UL approved wall transformer.
The 2PSWT is a basic two position homing and sequencing video switcher. The front panel controls consist of
a three position toggle switch for homing to either camera one or two or setting the dwell time via a recessed
pot in the front panel. The dwell time can be set from approximately two seconds to one minute. The 2PSWT is
powered by a 9-12VDC and is supplied with a UL approved wall transformer.