Service manual

2-16 Installation: Mechanical Installation

Figure 2-8 Slide Rail Installation for Non-Motorola Cabinet (Left Side Shown)

NOTE: The left-side slide rail assembly is shown, as viewed from the front of the cabinet. The left side

is a mirror image of the right side.

The middle-slide rail is not shown (for clarity).

Locking Tab

(towards back of

cabinet)

Outer-Slide Rail

Mounting Hardware

sets; (4)

Inner-Slide Rail Mounting

Screws (2), station side

Inner-Slide Rail

Outer-Slide

Rail

Direction That

Station Slides

Out

Station

Mounting

Screws; (2)

Mount Outer-Slide Rails to

Brackets; ONLY use lower slot

of Brackets.

Long Bracket

Short Bracket

Install a cage nut in line with clearance

hole in Threaded Strip prior to fitting

bracket to the front cabinet rail.

This nut is required for mounting the

station.

The cage nuts are provided with the

cabinet.

Threaded

Strip

Front Cabinet

Rail

Rear Cabinet

Rail

Bracket

Mounting

Screws; (4)